Chicago Electric Welder Flux 125 How To Use? Chicago electric flux 125 welder is lightweight, compact, and portable. It enhances the customer experience by facilitating wire feed speed control for. Http://www.instagram.com/strange.garage/As requested, I compiled some of the info that green welders can use to improve weld quality with their Flux 125. Spo…
The Chicago Electric Welder Flux 125 is a versatile welding machine that can be used to weld steel and aluminum. This welder is easy to use and can be used for home projects as well as professional applications. In this article, we will discuss how to use the Chicago Electric Welder Flux 125.
Before using the welder, it is important to read the user manual that comes with the welder. This will provide information on the safety features of the welder and how to set up the machine for welding. Make sure that all safety features are used and that the welder is set up correctly before beginning any welding.
Once the welder is set up and safety features are enabled, it is time to begin welding. The first step is to connect the power source to the welder. This can be done by plugging the power cord into the wall and then connecting the other end to the welder. Make sure that the power source is set to the appropriate voltage before connecting it to the welder.
The next step is to connect the electrode cable to the welder. This cable connects the welder to the electrode, which is the metal piece that will be used to make the weld. Make sure that the electrode is securely attached to the welder before welding.
The next step is to choose the type of welding rod that will be used for the project. There are two types of welding rods; E6011 and E7018. E6011 is a mild steel rod and is suitable for welding thin metals such as sheet metal and aluminum. E7018 is a stronger rod and is suitable for thicker metals such as steel pipes and structural steel.
Once the welding rod has been chosen, it is time to begin welding. The welder should be set to the correct voltage and amperage level for the type of welding rod that is being used. The electrode should be placed on the workpiece and the arc should be struck. The welder should be moved along the workpiece in a steady and continuous motion to ensure a strong weld.
When finished welding, the welder should be turned off and the electrode should be removed from the workpiece. The electrode should be inspected for any signs of damage or wear and then cleaned with a damp cloth. The welder should then be disconnected from the power source and the electrode cable should be disconnected from the welder.
By following these steps, you can easily use the Chicago Electric Welder Flux 125. Always make sure to read the user manual and follow safety procedures. Make sure to use the appropriate welding rod for the project and adjust the welder settings to the correct voltage and amperage. Finally, inspect the electrode and clean it after each use to ensure a safe and successful welding experience.
Harbor Freight Flux 125 Welder by Chicago Electric, No DCEN Modifications: REAL Review and Live Demo
A personal review and welding demo using an un-modified Chicago Electric Flux 125 Welder from Harbor Freight (Item# #63582). Many people mod these with a capacitor and bridge rectifier to convert the unit from AC to DC. This is the "upgraded" model that was previously known as the 90 Amp model. The Flux 125 has a safety built in so that the wire will not spark if it makes contact with your grounded metal if the trigger is not pulled. In…