How To Adjust The Clutch On A Harley? Visit http://www.thesmallengineshop.net**Always follow the instructions in your repair manual when doing repair or maintenance work on a motorcycle. Manuals … adjuster, use a dime as a gauge between the clutch lever and the clutch perch to determine the correct freeplay in the lever, when a dime will just barely stay.
Adjusting the clutch on a Harley Davidson motorcycle is not a difficult process, but it does require some knowledge of how the clutch works and the basic principles of motorcycle maintenance. This guide will provide a step-by-step process to help you understand how to adjust the clutch on your Harley.
The first step to adjusting the clutch on a Harley is to identify the type of engine and transmission you have. The clutch plates on a Harley are different depending on the type of engine and transmission you have.
Once you have identified the type of engine and transmission you have, the next step is to determine the current state of the clutch. To do this, you will need to look at the clutch plates and inspect them for wear and tear. If the clutch plates are worn or damaged, they will need to be replaced before you can adjust the clutch.
Once you have identified the current state of the clutch, the next step is to remove the clutch from the motorcycle. This can be done by using a clutch puller tool or a flathead screwdriver. Once you have removed the clutch, you will need to inspect the clutch plates for any signs of wear and tear. If the clutch plates are worn or damaged, they will need to be replaced.
Once you have installed the new clutch plates, the next step is to adjust the clutch. This can be done by turning the adjuster screws clockwise or counterclockwise until the clutch engages and disengages correctly. When adjusting the clutch, be sure to not over-tighten the screws as this can cause damage to the clutch plates.
Once the clutch has been adjusted correctly, the next step is to re-install the clutch onto the motorcycle. This can be done by reversing the steps you took to remove the clutch and then reinstalling the clutch plates.
Finally, the last step is to test the clutch to ensure it is working properly. To do this, you will need to start the motorcycle and then engage the clutch. If the clutch works properly, you can be sure that your Harley is ready to ride.
Adjusting the clutch on a Harley is not a difficult process, but it does require some knowledge of how the clutch works and the basic principles of motorcycle maintenance. By following the steps outlined in this guide, you will be able to adjust the clutch on your Harley and get back on the road in no time.
How to Adjust Harley-Davidson Clutch Cable by J&P Cycles
Shop clutch parts : jpcycles.com/clutch-assemblies?utm_source=youtube&utm_medium=description&utm_campaign=How_to_Adjust_Harley_Davidson_Clutch_Cable_by_JandP_Cycles&utm_term=4p_vjd0GtCk Why should you adjust your clutch? If your clutch is starting to wear and you have excessive movement in the clutch, you’ll need to tighten your clutch. Alternately, if you get “clutch creep,” meaning if you have the clutch pulled all of the way in and the…