How To Bypass Can am Dess System? Dry it out completely. Put it back together. Plug in and see if it starts.*. *If it starts up, you need to waterproof the back of the ignition with glue or resin or insolation. A vibration/Shock-resistant ball-and-socket design that ensures a reliable connection. Comes with 3 programmable keys: Work key: Limits vehicle speed to 40 kph (25 mph). Moderator. Jul 6, 2017. #15. wfo speedracer said: 95 was the year that had DESS capability but did not have it activated, all 96 models should have been equipped.
Can-Am DESS (Digitally Encoded Security System) is an anti-theft system designed for some Can-Am ATV models. While the system is designed to protect your ATV, there may be times when you need to bypass the security system. This can be done by disabling the system or removing its connection to the ignition.
For some Can-Am ATV models, you can bypass the Can-Am DESS system without having to remove the keys from the vehicle. To do this, you will need to disconnect the DESS post from the ignition switch. To do this, use an 8mm socket and remove the two bolts securing the DESS post to the ignition switch. It is important to note that the DESS post must be disconnected from the ignition switch for the vehicle to start.
If you are unable to remove the DESS post from the ignition switch, you can also disable the Can-Am DESS system. To do this, you will need to locate the DESS module. This module is located on the left-hand side of the ATV, near the front wheel. Once you have located the module, use a 12mm socket to remove the bolts securing it. Then, unplug the electrical connector from the module.
Once the DESS module is removed, you will need to locate the white/red wire in the electrical connector. This wire is the power source for the DESS system. Cut this wire and the system will be disabled, allowing the vehicle to start. It is important to note that the DESS system will remain disabled until the wire is reconnected.
In summary, you can bypass the Can-Am DESS system by either disconnecting the DESS post from the ignition switch or by disabling the system by removing the DESS module and cutting the white/red wire. It is important to note that the DESS system will remain disabled until the white/red wire is reconnected. If you are having trouble bypassing the system, it is recommended that you consult a certified mechanic for assistance.
canam spyder rss DESS bad key bypass. solved
problem 1: DESS "bad key" bypass = done 2: rusty gas tank = x 3: check transmission issue = x 4: brake failure = x