How To Calibrate Whirlpool Refrigerator Water Dispenser? To calibrate the water fill on a Whirlpool refrigerator, first flush the water system by running the water dispenser for several minutes to clear out any air in the line. Then,. FilterLogic NSF 3 pack: https://amzn.to/2S3Cd2YEveryDrop 1 pack: https://amzn.to/2xDkaqFEveryDrop 3 pack: https://amzn.to/2LF7vvNIf you are interested. To calibrate the water dispenser on a Whirlpool refrigerator, you need to place a sturdy measuring cup (1 cup [237 mL] size) on the dispenser tray centered in front of the. Calibrating Measured Fill on your Whirlpool Refrigerator Calibrating Measured Fill on your Whirlpool Refrigerator Household water pressure may affect the accuracy of the.
Do you have a Whirlpool refrigerator with a water dispenser? If so, you may have noticed that the water pressure is not as strong as it used to be. This can be a sign that your water dispenser needs to be calibrated. Calibrating your water dispenser can help improve the water pressure and make sure that your water dispenser is working correctly. Here’s how to calibrate your Whirlpool refrigerator water dispenser.
First, you will need to locate the calibration screw on your Whirlpool refrigerator. The calibration screw is located at the back of the refrigerator near the water filter. Once you have located the calibration screw, you will need to turn it clockwise to increase the water pressure, or counterclockwise to decrease the water pressure. Make sure to turn the calibration screw slowly and carefully to avoid damaging the refrigerator.
Next, you should determine the ideal water pressure for your Whirlpool refrigerator. To do this, you will need to check the pressure gauge on the back of the refrigerator. The ideal water pressure should be between 40 and 60 PSI. Once you have determined the ideal water pressure, you can adjust the calibration screw as needed to reach the desired pressure.
After you have adjusted the calibration screw, you will need to check the water pressure again. To do this, you will need to turn on the water dispenser and measure the pressure using the pressure gauge. If the water pressure is not correct, you can adjust the calibration screw again until the desired pressure is reached. Once you have reached the desired pressure, you can turn off the water dispenser and you are finished.
Calibrating your Whirlpool refrigerator water dispenser is a quick and easy process. With a few simple steps, you can make sure that your water dispenser is working correctly and providing the correct water pressure. To recap, here is a step-by-step guide:
- Locate the calibration screw on the back of the refrigerator near the water filter.
- Turn the calibration screw clockwise to increase the water pressure, or counterclockwise to decrease the water pressure.
- Check the pressure gauge and determine the ideal water pressure (between 40 and 60 PSI).
- Adjust the calibration screw as needed to reach the desired pressure.
- Turn on the water dispenser and measure the pressure using the pressure gauge.
- Adjust the calibration screw again until the desired pressure is reached.
- Turn off the water dispenser and you are finished.
By following these steps, you can easily calibrate your Whirlpool refrigerator water dispenser. If you are still having trouble, you can contact Whirlpool or a local appliance repair shop for further assistance. With a few simple steps, you can make sure that your water dispenser is providing the correct water pressure and working correctly.
How to Calibrate the Water dispenser on Whirlpool WRX735SDBM Refrigerator
FilterLogic NSF 3 pack: amzn.to/2S3Cd2Y EveryDrop 1 pack: amzn.to/2xDkaqF EveryDrop 3 pack: amzn.to/2LF7vvN If you are interested in seeing or purchasing items I use or Paisteboy Merch, click the links below: Paisteboy Gear: teespring.com/stores/paisteboy USA amazon.com/shop/paisteboy CAN amazon.ca/shop/paisteboy As an Amazon Associate, I earn from qualifying purchases. This helps support the channel and allows me to continue to make…