How To Clean Marlin Model 60

How To Clean Marlin Model 60? To clean a Marlin Model 60 22 rifle, follow these steps: 1. Disassemble the rifle as follows: Remove the barrel and bolt carrier assembly. Point the gun in a safe. Taking apart and cleaning the Marlin Glenfield model 60. Key moments. View all. remove each screw. remove each screw. 1:00. remove each screw. 1:00. blow.

How To Clean Marlin Model 60

Cleaning your Marlin Model 60 can be a tedious, but important task. Not only does it ensure that your rifle is in good working condition, but it can also help you identify any problems with the rifle that may need to be addressed. Cleaning your Marlin Model 60 is simple, but requires patience and the proper materials.

Before you begin, make sure you have the right materials on hand. You will need a cleaning rod, cleaning patches, gun oil, and a cleaning solvent. You may also need a bore brush if the barrel is particularly dirty. Additionally, make sure you have a safe and clean place to clean your Marlin Model 60, such as a well-ventilated area or a gun cleaning bench.

Once you have all the necessary materials, it’s time to start cleaning. Here are the steps you should take:

  • Remove the action from the stock. This can be done by unscrewing the action screws and carefully lifting the action away from the stock. Make sure to point the barrel away from yourself and anyone else in the area.
  • Clean the barrel with a cleaning rod and patches. Start at the chamber and work your way towards the muzzle. Make sure to use fresh patches each time as dirty patches can cause damage to the barrel.
  • Clean the action and stock with a cleaning solvent and a rag. Make sure to get in all the nooks and crannies. Pay special attention to the safety and trigger mechanism.
  • Once the rifle is clean, apply a thin coat of gun oil to the entire rifle. This will protect the metal surfaces and help keep the action operating smoothly.
  • Reassemble the rifle and check the functioning of the safety and trigger mechanism. Make sure they are working properly before use.

Cleaning your Marlin Model 60 regularly is important in order to keep the rifle in top condition. Make sure to clean your rifle after each use and to inspect it for any signs of damage or wear. Additionally, make sure to clean your rifle in a safe place and to follow all safety protocols when handling firearms. With the proper care and maintenance, your Marlin Model 60 will remain in perfect working order for years to come.

Marlin Model 60 Field Strip and Clean Guide

The Marlin Model 60 can be a little more involved to clean however it's not too bad. Just follow the steps shown in the video, and you'll be able to field strip and clean your Marlin Model 60 no problem. Buy a Shirt and Support the Channel: Subscribe Today! Buy my book! "Play Games, Get Paid!" Facebook: …

I have the model 60 and have found that the plastic recoil buffer is prone to breakage, especially with hyper-velocity rounds. They also can break due being brittle.

Leave a Comment