How To Clean Maytag Bravos Xl Washer Filter? Place a broad, flat container beneath the drain pump filter to collect the drain water. Release the black hose from the hose clip, remove the plug, and drain the hose.
Cleaning the filter on a Maytag Bravos XL Washer is an important part of regular maintenance and will help keep your washer running smoothly. In this article, we’ll walk you through the process step-by-step so you can keep your washer running in top condition.
First, turn off the washer and unplug it. This will prevent any shocks or other problems that can occur if there is an electrical connection.
Next, locate the filter. The filter is located on the back, near the bottom of the washer. It is a small, round cap with a slot in the center. The filter is usually white or silver in color.
Now, turn the filter counter-clockwise to remove it. Be sure to wear gloves and eye protection as the filter may be sharp or contain particles that can be hazardous to your health. Once the filter is removed, discard it and replace it with a new one.
To clean the filter, use a soft cloth and warm, soapy water. Gently scrub the filter with the cloth until all dirt and debris is removed. Rinse the filter with clean, warm water and then dry it completely.
Once the filter is clean, replace it by turning it clockwise until it is firmly in place. Make sure it is securely in place to avoid any water leakage. Once the filter is replaced, it is time to plug the washer back in and turn it on.
Cleaning the filter on your Maytag Bravos XL Washer is a simple process that requires only a few tools and a few minutes of your time. By following the steps outlined above, you can keep your washer running smoothly and efficiently.
Cleaning your Maytag Bravos XL Washer
This is a short explanation of how to remove the top of your Maytag washer in order to clean around the tub.