How To Drain A Bullfrog Hot Tub? Bullfrog Spas Long Island Hot Tubs how to fill start and drain a Bullfrog Spa Bullfrog Spas Manuals (PDF) 2023 Bullfrog Spas Owner’s Manual – X Series. 2022 Bullfrog Spas Owner’s Manual – Swim Series. 2022 Bullfrog Spas Owner’s Manual. 2021 Bullfrog. Open the valve and let the water drain out. Depending on the size of your tub, this could take a few minutes or longer. Once the water has finished draining, close. Locate the valve at the bottom of the spa. The valve is usually located behind the front panel of the spa. 3. Turn the valve to the "OFF" position. 4. Once the valve is in the "OFF".
Draining a bullfrog hot tub is a relatively simple process. However, it is important to take the right steps to ensure that you are draining the hot tub correctly and safely. With the right preparation and knowledge, you can easily drain a bullfrog hot tub yourself.
The first step in draining a bullfrog hot tub is to turn off the power supply. If you are draining the hot tub for maintenance purposes, then you should also turn off the water supply to the hot tub. Make sure that the power and water supply are both turned off before you begin draining the hot tub.
The next step is to locate the drain plug. The drain plug is usually located at the bottom of the hot tub. Once you have located the drain plug, it is important to make sure that it is properly closed. This will help to ensure that the hot tub does not leak when it is being drained.
Once the water supply and power supply have been turned off and the drain plug is properly closed, the next step is to attach a garden hose to the drain plug. Make sure to secure the garden hose to the drain plug firmly so that it does not become loose while you are draining the hot tub.
Next, you will need to open the drain plug slightly to allow the water to begin draining out of the hot tub. Once the water has drained out, close the drain plug and remove the garden hose. Make sure that the hose is disconnected from the drain plug before you turn the water supply back on.
After the water has been drained out of the hot tub, it is important to clean the inside of the hot tub. This can be done with a mild detergent and a soft cloth. Make sure to rinse the inside of the hot tub thoroughly with clean water to remove any residue from the detergent.
Finally, it is important to inspect the drain plug for any debris. If there is debris present, it is important to remove it before you turn the water supply back on. This will help to ensure that the hot tub does not leak when it is full of water again.
By following these simple steps, you can easily drain a bullfrog hot tub. It is important to make sure that the power and water supply are both turned off and that the drain plug is properly closed before you begin draining the hot tub. Additionally, it is important to make sure that the inside of the hot tub is cleaned and any debris is removed from the drain plug before turning the water supply back on.
Draining your Bullfrog Spa
Check out this video on how to drain your Bullfrog Spa. Step 1: Turn-off main electrical breaker to spa. Step 2: Locate drain below equipment compartment door. Step 3: Pull the drain out with a slight clockwise turn. Use pliers if needed. NOTE: Drain is fully extended at approximately 2 inches (5 centimeters). Step 4: Remove drain cap. NOTE: The drain spout will not drain when fully extended. Step 5: Attach a standard garden hose. Push…