How To Drill Into Stucco Wall

How To Drill Into Stucco Wall? Can I Drill Through Stucco? To answer the question, yes you can drill through stucco with the right drill bit and proper drill. Masonry type of bits with carbide or diamond tips.

How To Drill Into Stucco Wall

Stucco is a common material used to cover the exterior walls of homes and businesses, but it does not always provide the best access for drilling. When it is necessary to mount shelves, hang pictures, or install security cameras, it is important to know how to drill into stucco walls safely and effectively. This guide provides a few tips on how to accomplish the task.

To begin, it is important to understand the composition of stucco walls. Stucco is typically made up of a combination of Portland cement, sand, lime, and water. In some cases, a bonding agent is also included in the mix. The material is durable and can withstand exposure to the elements, but it is vulnerable to cracking when it is drilled. For this reason, it is important to take extra care when drilling into stucco walls.

The following steps provide the best approach for drilling into stucco walls:

  • Choose the right drill bit. Stucco requires a masonry bit to create the perfect hole. Choose a bit that is slightly larger than the diameter of the screw or bolt that will be inserted into the wall.
  • Mark the spot for drilling. Use a pencil to mark the spot where the hole will be drilled. This will prevent the drill from slipping off target.
  • Attach the drill bit. Secure the bit in the chuck of the drill and tighten it firmly. Make sure that the bit is straight before turning on the drill.
  • Drill the hole. Apply light pressure to the drill and begin drilling. Move the drill slowly and steadily until the desired depth is reached.
  • Remove the drill bit. When the hole is complete, remove the bit and wipe away any debris. Clean the surface of the stucco to remove any dust or dirt.
  • Insert the screw or bolt. Insert the screw or bolt into the hole and tighten it firmly. Be careful not to overtighten, as this could cause the stucco to crack.

Drilling into stucco walls requires extra care and caution. The quality of the drill bit and the accuracy of the hole are both critically important. If the drill bit is not the proper size, the hole may be too large or too small for the screw or bolt. Additionally, if the hole is not drilled properly, the stucco may crack when the screw or bolt is inserted. It is also important to take care not to overload the drill, as this could cause the drill to slip or the stucco to crack.

By following these tips, anyone can drill into stucco walls with confidence. With the right tools and a little bit of patience, it is possible to mount shelves, hang pictures, or install security cameras without damaging the stucco.


Here is how to drill a whole into stucco with a hammer drill. For hanging up all kinds of items from TVs and storage shelves to garage door openers and lights. I recently looked online and couldn't find any clear instructions on how to drill into the side of a stucco house. I am building an storage on the side of the house for pool and pond supplies and I will make a video of that vetti vetti soon. I used TAP-CON drill bits and anchors. I hope…

Leave a Comment