How To Fix Lava 2 Not Hitting

How To Fix Lava 2 Not Hitting? lava 2 not working nsfw hey y’all, i just charged my lava 2 battery and put the pod in and it’s not hitting, what do i do 1 comment 50% Upvoted Sort by: top (suggested) no comments. Lava 2 won’t charge. Just bought it from a friend. When I plug it in I have to angle the charger into the port, and even then all the damn thing does is blink. The light isn’t. SMOK Novo 2 Not Hitting If your SMOK Novo 2 isn’t hitting, the most likely reason is that the battery simply isn’t charged. Connect the battery to the charging cable.

How To Fix Lava 2 Not Hitting

Fixing a Lava 2 that isn’t hitting can be a hassle, but it isn’t an impossible task. With a few simple steps, you can get your device up and running again. Here’s what to do.

First, check the battery. Make sure that the battery is properly charged and the connections are secure. If the battery isn’t charged, plug it in and give it a few hours to charge up. If the connections are loose or broken, tighten them and make sure they’re secure.

Next, check for any obstructions that might be preventing the Lava 2 from hitting. If there is dirt or lint stuck in the device, clean it out with a cotton swab. If there is any debris blocking the firing button, remove it with a toothpick or tweezers. Make sure that the firing button is free and clear.

If the above steps don’t work, you may need to replace the coil. To do this, turn the device off and unscrew the base. Remove the old coil and replace it with a new one. Make sure the new coil is securely screwed in place.

Finally, check the wattage. If the wattage is too low, the coil won’t be able to produce enough heat to vaporize the e-liquid. Increase the wattage and then try to hit the device again. If the wattage is too high, it can burn the coil and make it unusable. Lower the wattage to a safe level and then test the device.

Fixing a Lava 2 that isn’t hitting is a simple task if you know what to do. Start by checking the battery and connections. Then, check for any obstructions blocking the firing button. If that doesn’t work, replace the coil and check the wattage. With these steps, you can get your Lava 2 up and running in no time.

Pod Device not hitting real fix (works for most devices)

#vape #novo #pod #hitting

Using a cell until it drops to 3.0V means it might bounce back up to 3.3V or even a higher once you stop. But that cell with the 3.0V resting voltage might have been discharged to.

Leave a Comment