How To Fix Ofb On Washer? To clear the error code on your washing machine, you have to press the selang antara/ cancel button twice and the power button once. If still, code is displayed,. Step 1: Check to see if the load is unbalanced. Laundry loads should be loosely packed to prevent spin speeds from slowing. Clothing that is excessively damp at the end of a wash. OFb always goes on when spinning. Fill and wash cycle ok then after draining and spin cycle start, machine starts to shimmy and OFb indicator light comes. If the washer sits on an uneven surface, its feet will need to be adjusted, or something like a strip of carpet will need to be put under the washer to balance it. Another option is to put.
If your washer is displaying the OFB error code, it means there is an issue with the machine’s water flow. This error is caused by either a clogged filter or a clogged water supply line. Before attempting to fix the issue, it is important to unplug the washer and ensure that all water supply lines are turned off.
To diagnose and fix the issue, you can follow the steps below:
- Check the filter: Locate the filter on your washer and make sure it is not clogged with debris. If it is, remove the debris and clean the filter with a brush or cloth. If the filter is in good condition, you can proceed to the next step.
- Check the water supply line: Unplug the washer from the wall and remove the hose from the back of the washer. Make sure the hose is free from any blockages. If there is a blockage, use a brush to remove it. Once the blockage is removed, reattach the hose to the back of the washer.
- Check the inlet valve: Locate the inlet valve on the back of the washer and make sure it is open. If the valve is closed, open it and ensure that the valve is in the “on” position.
- Restart the washer: Once all of the steps above have been completed, plug the washer back in and turn the power back on. The OFB error should now be resolved.
If the OFB error persists after following the steps above, you may need to contact a professional to diagnose and repair the issue. It is important to note that attempting to repair or diagnose the issue without proper knowledge and experience may cause further damage to the washer.
In conclusion, if your washer is displaying an OFB error code, you should start by unplugging the washer and checking the filter, the water supply line, and the inlet valve. If the issue is not resolved after following the steps above, you should contact a professional to diagnose and repair the issue.
My top load washing machine has error code OFB for off
From justanswer.com/ythi JustAnswer Customer: My top load washing machine has error code OFB for off balance, how can I fix it? Pearl Wilson: Assistant: What happened just before your washer displayed this message? JustAnswer Customer: it went into the spin cycle and I heard excessive vibration before it stopped and displayed error code Pearl Wilson: Assistant: How long has this been going on with your washer? Pearl Wilson: Assistant:…
When your washer isn’t working right, the solution may be as simple as switching up detergents, tightening a hose or leveling the appliance. Some issues will require. Washer vibration can be caused by a machine not being properly leveled. To make sure a washer is a level, use a carpenter’s level on the top of the washer. If any legs are off and.