How To Make A Leather Scout Woggle

How To Make A Leather Scout Woggle? how to make woggle. what is woggle ? a loop or ring of leather or cord through which the ends of a Scout's neckerchief are threaded . there are many time.

How To Make A Leather Scout Woggle
surce: YouTube

If you’ve ever been involved in Scouting, you’ve no doubt seen a leather scout woggle. This small, leather accessory is used to hold a neckerchief in place on a scout’s uniform and is an integral part of the uniform. Making a leather scout woggle is a great way to pay homage to the Scouting tradition, and it can be done quite easily with a few simple tools. Here’s how.

First, you’ll need to gather the materials. You’ll need a piece of leather, a leather punch, a ruler, and a pair of scissors. The leather should be about 2.5 cm (1 inch) wide and 10 cm (4 inches) long. Once you’ve gathered the materials, you’ll need to measure and mark the leather with a ruler. You’ll want to mark the center of the leather, as well as 5 cm (2 inches) from the edges of the leather. This will give you three points that you’ll need to punch with the leather punch.

Once the leather has been marked, you can use the leather punch to make the three holes. Make sure to punch the holes through evenly, as this will ensure that the woggle looks even when it is finished. Once the holes have been punched, you’ll need to cut the leather in half to make two separate pieces. The two pieces should be the same size and shape.

Once you’ve cut the leather into two pieces, you’ll need to braid the leather. To do this, you’ll need to start by taking one of the pieces and threading it through the center hole of the other piece. Once you’ve done this, you’ll need to take the end of the piece you just threaded and thread it through the hole on one side of the other piece. Do this again with the other end of the piece, threading it through the hole on the other side.

Once the leather has been braided, you’ll need to tie the ends together to keep the woggle secure. To do this, you’ll need to place the two ends together and wrap them around each other several times. Then, take a piece of thread, or a piece of leather, and tie the ends together. This will keep the woggle in place and ensure that it won’t come undone.

Finally, you’ll need to attach the woggle to the neckerchief. To do this, simply thread the neckerchief through the braid and then tie it securely. You can also use a safety pin to secure the woggle, if you prefer.

Making a leather scout woggle is a great way to pay homage to the Scouting tradition. With just a few simple tools and materials, you can easily make your own woggle to add to your uniform. So grab your materials and get started!

Plaited Leather Woggles

Most Scouts and Guides will be familiar with the image of the plaited leather woggle, but few will have made one. Quite a few younglings have unravelled a plaited woggle, only to be unable to reverse their fiddling. Unfortunately, the few instructions available online are unclear; poorly written text with poor-quality scans of poor-quality photocopies. I have spent time going through such resources as there are, and put together this.

Leave a Comment