How To Prime Intex Sand Filter Pump? Use a garden hose to fill the pump basket slowly and put the lid back in place. Once the pump basket is filled and tightened, ensure the air release valve is open and turn the. Turn on the pump first, then slowly open one suction-side valve only. Wait for the pump to catch its prime and get a good flow of water going. If the Pump Does Not. Pump is not elevated at all, maybe 4 inches on the platform I built. Same one I used last year. I do not open the system at all. I can literally hit the switch from on mode.
Intex Sand Filter Pump is an effective pool water filtration system for above ground pools. It is important to prime the pump properly before use. Priming the pump is an easy task that can be done in a few minutes. Here is a step-by-step guide on how to prime Intex Sand Filter Pump.
Before you begin priming the pump, you must first assemble the filter. Make sure all the parts are securely fastened and that the hoses are properly attached. Once the filter is assembled, you can begin priming the pump.
Priming the pump involves adding water to the filter until the pump housing is filled with water. Here are the steps:
- Attach a garden hose to the pump intake.
- Turn on the water and allow it to fill the pump housing.
- Once the pump housing is filled with water, turn off the water.
- Remove the garden hose from the pump intake.
- Turn on the power switch on the pump to start it.
- Check the water pressure gauge to make sure the pump is working properly.
The pump should be primed and ready for use. After priming the pump, you should check the filter cartridge every two weeks to make sure it is clean and free of debris. If the cartridge is dirty, it should be replaced with a new one.
It is important to follow the above steps carefully in order to properly prime Intex Sand Filter Pump. If the pump is not primed correctly, it may not work properly and it could damage the filter system. By following the steps above and regularly checking the filter cartridge, you can ensure that your Intex Sand Filter Pump is working properly.
Sand Filter Set up and First Run
Doug Sets up and operates his Sand Filter pump for the first time this pool season