How To Program A Jandy Variable Speed Pump? From your iAqualink Home screen ( option on the app), click Menu->System Setup->VSP Setup ->Speed Setup. For a special speed that's not tied to a. To run the pump at a different speed, I've got another schedule item at say 11am – 12pm that actually selects the speed – "3k" in my case to run the pump at. Log in to the iaqualink site/app (select "WEB" if using phone app) 2. Select MENU/SYSTEM SETUP/VSP SETUP (once here, you should see your pump on line 1 -.
Programming a Jandy variable speed pump is a relatively simple process, but it is important to understand the steps involved to ensure the pump is operating correctly. The following guide will provide an easy-to-follow explanation of how to program a Jandy variable speed pump.
The first step is to locate the control panel of the pump. The control panel is typically located on the side of the pump housing and will contain several knobs, buttons and other features. Once you have located the control panel, you will need to familiarize yourself with the various settings and features available.
The next step is to set the speed of the pump. The speed can be adjusted by using the knobs or buttons on the control panel. Once the speed is set, you will need to select a cycle time. The cycle time determines how long the pump will run before it shuts off. You can select a cycle time that is shorter or longer than the default setting, depending on your specific needs.
The next step is to select a pump type. The type of pump you select will depend on the type of pool or spa you have. For example, if you have an above-ground pool or a spa, you will need to select a pump specifically designed for those types of pools and spas. If you have an in-ground pool, you will need to select a pump that is designed for that type of pool.
The final step is to program the pump. This is done by using the knobs or buttons on the control panel. You will need to enter the desired settings, such as the speed, cycle time and pump type, and then press the “program” button. After the settings are entered, the pump should begin to operate according to the programmed settings.
Programming a Jandy variable speed pump is a relatively simple process, and following the steps outlined above should ensure that the pump is programmed correctly. If you have any questions or concerns about the process, it is best to contact a qualified technician for assistance.
How To Program a Jandy JEP-R Variable Speed Pump Controller
In this video I go over the programming of the Jandy JEP-R Variable-Speed Pump Digital Controller for the Jandy Variable Speed pumps. The JEP-R looks complicated to program but is actually quite easy. The JEP-R overall is a good controller for your Jandy Variable speed (VS) pump. The JEP-R can hold two schedule speed programs and up to a total of eight different speeds. This is where it can be confusing. You can program only two speeds to…