How To Remove Back Seat Ford Focus? Open the hatch and remove the cargo cover by unclipping the strings attached to the hatch lid. Slightly lift up on the cover and pull it toward you, it will. Video on how to lower the back seat portion on Ford Focus sedan ( 2011 | 2012 | 2013 | 2014 | 2015 | 2016 | 2017 | 2018 | S | SE | SEL | ST | TITANIUM ). Ford. Just pry up the seat from the front, jam your fingers in and feel around for it. One side at a time should be no problem. Then the back clips you kind of push the seat.
Removing the back seat of a Ford Focus is a relatively easy task that anyone can do with the right tools and a bit of patience. With a few basic tools and some time, you can remove the back seat of your Ford Focus in no time. Here’s how:
First, you’ll need to gather the tools you’ll need to complete the job: a flat-head screwdriver, a Phillips-head screwdriver, and an adjustable wrench. Once you have these tools, you’re ready to get started.
To begin, locate the bolts that hold the back seat in place. These should be located on the bottom of the seat and will require a Phillips-head screwdriver to remove. Once all of the bolts are removed, you should be able to lift the seat up and out of the car.
Next, you’ll need to remove the seat belt buckles from the back of the seat. To do this, you’ll need an adjustable wrench. Loosen the bolts that hold the buckles in place and then remove them. Once the buckles are removed, you should be able to easily lift the seat out of the car.
Finally, you’ll need to remove the seat belt retractors. These are located on either side of the seat and will require a flat-head screwdriver to remove. Once the retractors are removed, you should be able to easily lift the seat out of the car.
Now that the back seat is out of your Ford Focus, you’re ready to move onto the next step in your project. Whether you’re replacing the back seat or doing some other kind of repair, you now have the knowledge and tools necessary to remove the back seat of your Ford Focus. Good luck!
Ford Focus Back Seat Removal
How to change replace the back seats on a Ford Focus. You will need torx key (6 point star shape) size T40. The model shown is a first generation 1998 to 2004, so covers years 1998, 1999, 2000, 2001, 2002, 2003, and 2004. Mark 1.
Posted November 7, 2020. Yep, there's clips under the seat base you push to one side. Just put you hand under the o/s and n/s seat base and feel for the clip. Then.