How To Remove Cover On Honeywell Pro Series Thermostat? On most Honeywell thermostat models, all you have to do to remove the cover is to pull it off, but some could have tabs or clips that you need to push to release it.. Drill holes at marked positions, and then lightly tap supplied wall anchors into the wall using a hammer. ‒ Drill 7/32” holes for drywall. Pull the door.
Honeywell Pro Series Thermostats are amongst the most popular thermostats on the market. They are easy to program and have a variety of features that make them a great choice for home or business use. However, if you ever need to remove the cover from your Honeywell Pro Series Thermostat, it can be a bit tricky. That’s why we’re here to help. In this article, we’ll walk you through the steps of how to remove the cover on a Honeywell Pro Series Thermostat.
Before you start, make sure you have the necessary tools. You’ll need a small flat-head screwdriver and a Phillips-head screwdriver. You may also need a pair of needle-nose pliers.
Now, let’s get started. Here’s how to remove the cover on a Honeywell Pro Series Thermostat:
- Remove the screws on the back of the thermostat. There are usually two screws, one at the top and one at the bottom. Use a Phillips-head screwdriver to remove the screws.
- Lift the cover off the thermostat. The cover is held in place by two plastic tabs. You may need to use the tip of a flat-head screwdriver to help lift the cover off the thermostat.
- Disconnect the wires. The wires should be labeled with numbers or letters. If the wires are not labeled, use a pen to make a note of the number or letter associated with each wire. Then, use a pair of needle-nose pliers to disconnect the wires.
- Remove the screws holding the thermostat to the wall. Use a Phillips-head screwdriver to remove the screws. Once the screws are removed, the thermostat should come off the wall.
- Remove the plastic tabs holding the cover in place. Use a pair of needle-nose pliers to remove the tabs. Once the tabs are removed, the cover should come off.
And there you have it! That’s how to remove the cover on a Honeywell Pro Series Thermostat. When you’re done, make sure to reconnect the wires and replace the cover and screws. This will help ensure that your thermostat is functioning properly.
If you’re still having trouble removing the cover from your Honeywell Pro Series Thermostat, you may want to contact a professional HVAC technician for assistance. They should be able to help you with any questions you may have.
We hope this article has been helpful in showing you how to remove the cover on a Honeywell Pro Series Thermostat. If you have any further questions, please don’t hesitate to contact us. We’d be more than happy to help!
Replace Home Thermostat Battery-Honeywell T4 Pro Programmable
Here's how to replace the batter in a Honeywell T4 Pro Programmable thermostat.
Find that location, and use your fingers to grasp the edge of the cover and gently swing it open. It will either swing up or down, or side to side. If instead your. Turn your thermostat off by switching it to the off position. Open the battery door. Remove the batteries. Insert the batteries backward so the negative sides line up to.