How To Remove Tone Knobs Stratocaster? There are three knobs on a Stratocaster’s body, slightly to the right of the pickup selector. They sit in a diagonal line, placing some higher on the body than others.. Tone 1 is the one closest to the pickup switch, the tone 2 is the one furthest away, closer to the input jack. Tone 1 Control Knob This tone knob controls how much. So it would be a two-knob strat, with two tone knobs. Another idea is to remove the volume knob and make the middle knob a volume knob. There would be a. Hold the edge of your cloth or rag at its taut and slide it underneath the control knob you want to remove. Wrap the cloth or rag around the circumference of the knob until you.
Removing tone knobs from a Stratocaster can be a difficult process and requires some technical know-how. However, with the right tools and a little patience, you can successfully remove the knobs from your Stratocaster. Before beginning, make sure you have the proper tools and safety gear to complete the job. Here are the steps for removing tone knobs from a Stratocaster.
Step 1: Unscrew the Screws – The first step to removing tone knobs from a Stratocaster is to unscrew the screws located on the back of the guitar. You can use a Phillips head screwdriver to do this. Be sure to turn the screws counter-clockwise until they are fully removed.
Step 2: Remove the Knobs – Once the screws have been removed, the next step is to remove the knobs. To do this, you will need to use a flathead screwdriver. Insert the screwdriver into the slot in the knob and gently twist it counter-clockwise until the knob is removed. Do this for all of the knobs.
Step 3: Remove the Control Plate – After the knobs are removed, you will need to remove the control plate. To do this, use a Phillips head screwdriver to unscrew the screws located on the back of the guitar. Once the screws are removed, the control plate should come off easily.
Step 4: Disconnect the Wiring – Now that the control plate is removed, you will need to disconnect the wiring from the knobs. To do this, locate the wires connected to the back of the guitar and carefully disconnect them. Be sure to note which wires go where.
Step 5: Remove the Knobs from the Control Plate – Once the wiring is disconnected, you can then remove the knobs from the control plate. To do this, use a flathead screwdriver to gently pry the knobs off of the control plate. Do this for all of the knobs.
Step 6: Reattach the Control Plate – After the knobs are removed, you will need to reattach the control plate. To do this, use a Phillips head screwdriver to reattach the screws located on the back of the guitar. Be sure to tighten them securely.
Step 7: Reattach the Knobs – Finally, you will need to reattach the knobs to the control plate. To do this, insert the knobs into the slots in the control plate and use a flathead screwdriver to twist them into place. Be sure to tighten them securely.
Removing tone knobs from a Stratocaster can be a difficult process, but with the right tools and a little patience, it can be done. Be sure to use the steps outlined above and use caution when working with your Stratocaster. With the correct tools and a little knowledge, you can successfully remove the tone knobs from your Stratocaster.
How to remove guitar volume and tone knobs
In this video Electric Ed provides some helpful tips on how to remove volume and tone knobs from a strat belonging to Jesse Valenzuela of the Gin Blossoms. He's planning to install a set of Lindy Fralin pickups and Terminator SVDT-5S system. Learn more at madhatterguitarproducts.com