How To Remove Troy Bilt Weed Eater Head? Troy-Bilt Operator's Manuals & Illustrated Parts Diagrams. Number of Views 226.01K. Troy-Bilt Warranty. Number of Views 57.79K. Troy-Bilt Authorized Service Center Directory..
Removing the head of a Troy Bilt weed eater is a relatively straightforward process that requires only a few tools. The head contains the line used for cutting grass and weeds, so it is important to remove it and replace it when needed. This guide will provide you with the necessary steps to successfully remove the head of your Troy Bilt weed eater.
First, make sure the weed eater is unplugged and the engine is off. Then, find the two screws on either side of the head. These screws can usually be found near the handle of the weed eater. Using a screwdriver, loosen the screws until they are loose enough to be removed.
Once the screws are removed, you should be able to lift the head off of the weed eater. If it is stuck on, you may have to use a pair of pliers to help pry it off. Once the head is off, you should be able to access the line spool. If you need to replace the line spool, simply unscrew the spool and remove it.
After you have removed or replaced the line spool, you can begin to reassemble the head. Place the head back onto the weed eater and then replace the two screws you loosened earlier. Make sure the screws are tight and secure before you continue. You may need to use a screwdriver to tighten them further.
Finally, you can begin to rewind the line onto the spool. To do this, you will need to check the manufacturer’s instructions on how to wind the line. Generally, you will need to hold the spool still while you wrap the line around the spool in an even pattern. Once the line is securely in place, replace the head on the weed eater and you are ready to start using it.
In conclusion, removing the head of your Troy Bilt weed eater is a simple process that requires only a few tools. First, you need to loosen the screws on either side of the head. Then, you can lift the head off and access the line spool. After the spool is replaced, you can begin to reassemble the head and then rewind the line. Following these steps will help you successfully remove the head of your Troy Bilt weed eater.
Troy-Bilt TB525 EC Cutting Head Removal
How to remove the original (old style) cutting head from a Troy-Bilt EB525 EC Trimmer. There are a few videos out there with incorrect information on the removal for this model. In this video I explain the correct way, although I had already done it, so it is not exactly demonstrated live.