How To Replace Chainsaw Chain? There are usually two nuts holding the chainsaw side plate on. Remove the plate by unscrewing the nuts with a socket wrench. Before removing the chainsaw’s sprocket, unlock the chain saw’s brake if it is attached to the side plate. If you remove the. To replace or to sharpen When your chainsaw starts to show signs of a dull chain, inspect the bar and chain carefully. You don’t necessarily need to replace a dull chain. There is a chance that you can sharpen the existing chain to get the most for your.
Replacing the chain in a chainsaw can be a daunting task, but it doesn’t have to be. With the right tools, a little bit of knowledge, and some patience, you can have your chainsaw up and running in no time. Here’s how to replace a chainsaw chain.
First and foremost, make sure that the chainsaw is off and unplugged. You don’t want to risk getting injured by accidentally starting the saw while you’re working on it. Next, remove the bar and the chain from the chainsaw. This can be done by removing the bar’s retaining screws and sliding the bar out of the saw.
Once the bar and chain have been removed, inspect the chain to ensure that it is not damaged beyond repair. If it is, it’s time to purchase a new chain. If it looks okay, use a chain sharpener to sharpen the teeth of the chain. This will help it run more efficiently.
Once the chain is sharpened, it’s time to install the new chain. Start by placing the bar back on the saw, making sure that the grooves in the bar line up with the holes in the saw. Then, fit the chain onto the bar, beginning with the left side and working your way around. Make sure that the teeth of the chain are facing the correct direction.
Once the chain is in place, you need to tension it. This can be done by using a tensioning screw and a tensioner to adjust the tension of the chain. Make sure that the chain is tight, but not so tight that it binds. Once the tension is set, you’re ready to move on to the next step.
The last step is to secure the chain and bar in place. This can be done by securing the bar’s retaining screws, and then tightening them with a wrench. Make sure that the screws are tight, and that the chain is not able to move or become loose.
And there you have it: you’ve successfully replaced the chain in your chainsaw. With the right tools and a little bit of patience, this job can be completed in no time. Now you’re ready to get back to cutting and trimming all your outdoor projects!
How To Put A Chain On A Chainsaw Properly
Don't put your chainsaw chain on backwards, it won't cut worth a sh*t! This applies to all chain saws including Husqvarna, Stihl, Echo Etc. How to install Your Chainsaw Chain on Properly. ✅Click here for a new chain ➜ amzn.to/2BkJHpw ✅Check out this chainsaw wrench ➜ amzn.to/2iMUIIf 👍Please click the like button and tell me what you think of this video in the comments section below. 👇👇👇 For more videos like this, check out: 👉Top 5…