How To Replace Rv Awning Roller Tube? Step 1: Buy the exact model of your camper awning roller tube Step 2: Unscrew the bolts holding the awning to the RV Step 3: Take off your awning roller tube Step 4:.
Replacing an RV awning roller tube is a job that can be done with some basic knowledge and the right tools. It is important to know what size and type of tube you need for your RV and to make sure you have the right tools for the job. This article will provide you with a step-by-step guide on how to safely and effectively replace an RV awning roller tube.
Before you start working on replacing the RV awning roller tube, you will need to gather the necessary tools. You will need a measuring tape, a drill with drill bits, a pair of pliers, a pair of scissors, a screwdriver, and a pair of scissors. You may also want to purchase a replacement roller tube from an RV supply store.
The first step to replacing the RV awning roller tube is to measure the existing tube. Measure the width and length of the tube, as well as the thickness of the material. This information is important when you go to purchase a new roller tube. Once you have the measurements, you will be able to purchase the correct size and type of tube.
Next, you will need to remove the old tube from the RV. Unscrew the mounting screws that are located around the perimeter of the tube and then carefully remove the tube from the RV. Be sure to keep all the mounting screws, nuts, and washers in a safe place.
Once the tube is removed, you can now begin to install the new tube. Start by installing the new tube in the same location as the old tube. Make sure that the mounting screws are in the same places. Then, attach the tube to the RV with the screws, nuts, and washers. Finally, use the drill to make any necessary holes in the tube for the mounting screws.
Now it is time to attach the awning to the RV. Start by threading the awning through the roller tube. Make sure that the fabric is secured to the roller tube with the provided screws and washers. Finally, attach the awning to the RV with the provided screws and nuts.
Finally, you will need to trim any excess material from the roller tube. First, measure the tube and then use the scissors to trim the excess material. Make sure to leave enough material so that the tube remains securely attached to the RV.
Replacing an RV awning roller tube is not a difficult job and can be done in a few simple steps. Be sure to take your time and measure the tube accurately before purchasing a new one. Once you have the right tube and the necessary tools, you can easily and safely replace the tube in your RV.
Fastest RV Awning Fabric Replacement I've Seen
This is not a sponsered video. I Was at Power RVz in Mesa, AZ and my good friend Stacy of Awnings R Us was there replacing an awning fabric. His company only repairs and installs RV awnings so they are very good and fast. This is a standard manual Dometic RV Awning but he is installing a Carefree of Colorado fabric which changed the design of the fabric to have a pushed in piping like a sceen door fabric. I think I learned a few things…
Pull the spring assembly out from the tube and keep in mind where the awning and valence are installed in the rails. Slide-out the valence, then the tube from the RV awning fabric..