How To Restring A Troy Bilt Weed Eater? How to String a Troy-Bilt TB575SS. The Troy-Bilt TB575SS trimmer is designed to cut grass and light weeds. The unit dispenses new line when you bump it on the ground during. 1. Flip the switch to the "Off" position and unplug the electrical cord from the outlet. 2. Cut 0.080-inch trimming line into 2, 10-foot pieces with scissors and set them aside. 3. Turn.
Restringing a Troy Bilt weed eater is not a difficult task. However, it does require some preparation and attention to detail in order to do it correctly. With the right tools and a little bit of patience, anyone can restring their Troy Bilt weed eater and get back to trimming their yard in no time.
The first step in restringing a Troy Bilt weed eater is to gather the necessary materials. You will need a new spool of string, a pair of scissors, a small Phillips-head screwdriver, and a pair of pliers.
Once you have all of the necessary materials, you will need to begin the actual restringing process. To do this, start by turning the weed eater off and unplugging it from the power source. This is an important safety precaution that should be taken before beginning any work on any electrical device.
Next, locate the spool cap on the weed eater. This is usually located on the top of the weed eater near the handle. Use the small Phillips-head screwdriver to remove the cap. Once the cap is off, the spool will become visible.
Now that the spool is visible, it is time to remove the old string. To do this, take the pair of pliers and loosen the nut that is located in the center of the spool. Once the nut is loosened, the old string should come off easily. Be sure to remove all of the old string from the spool and discard it.
Once the old string is removed, it is time to install the new string. Begin by feeding the new string through the eyelet located on the side of the spool. Once the string is through the eyelet, wrap it around the spool in a clockwise direction. Continue wrapping the string around the spool until it is completely filled.
Once the spool is filled with the new string, use the pair of scissors to cut off the excess string. Be sure to leave enough string on the spool so that it can be reattached to the eyelet.
The last step in restringing the Troy Bilt weed eater is to reattach the spool cap. To do this, use the Phillips-head screwdriver to replace the spool cap. Once the cap is in place, the weed eater is ready to be used again.
Restringing a Troy Bilt weed eater is not an overly complicated task. With the right tools and a bit of patience, anyone can successfully restring their weed eater and get back to trimming their lawn in no time.
* Troy-bilt tb 22 ec weedeater line replace
echo .095 line amzn.to/2P7ifn8 .080 trimmer line (doesn't last as long) amzn.to/33okc7h todays t-shirt brought to you by YOUR NAME HERE amzn.to/2XcvIhY if this video helped you donate a buck or two to my GoFundMe account gofundme.com/f/help-me-buy-my-own-shop?utm_source=customer&utm_medium=copy_link&utm_campaign=p_cf+share-flow-1 The small engine guys are a participant in the Amazon Services LLC Associates Program, an affiliate…
1. Shut off the weed eater and disconnect the spark plug wire to prevent it from accidentally starting. 2. Cut 20 feet of .095 round line for the Click N Trim or 10 feet for the. To restring a standard bump-feed model, you have to remove the spool, which you do by unscrewing and removing the bump knob and taking out the spool and spring. Feed a 10.