How To Turn Cooling On Whirlpool Refrigerator

How To Turn Cooling On Whirlpool Refrigerator? To turn cooling off, press and hold the SMART GRID and FILTER buttons at the same time for 3 seconds. IMPORTANT: To avoid unintentionally locking the dispenser or changing. The convert mode in a Whirlpool Intellifresh refrigerator model allows you to turn the freezer into a refrigerator. All you have to do is to press a button on the control panel to convert.

How To Turn Cooling On Whirlpool Refrigerator

Having a difficult time turning on the cooling on your Whirlpool refrigerator? Don’t worry, we are here to help! By following the steps below, you will be able to get your refrigerator to the right temperature in no time.

The first thing you should do is locate the temperature control on your fridge. This will be located either in the front (most newer models) or inside the fresh food compartment (older models). It is usually a small wheel or button. On the wheel, there will be a temperature indicator with numbers in the range of 1 to 5. If there is a button, you may have to press it multiple times to change the temperature.

Once you have located the temperature control, you can start turning on the cooling. Here’s how:

  • If you are using a wheel, turn it to the right to increase the temperature and to the left to decrease it. To turn on the cooling, you should set the temperature to the lowest setting (1 or the coldest setting).
  • If you are using a button, press the button until you reach the lowest temperature setting (1 or the coldest setting).

Once you have set the temperature to the lowest setting, the cooling should kick in within a few minutes. If it doesn’t, you may have to check the power connection or the condenser coils.

The power connection should be checked first. Make sure that the power cord is plugged firmly into the outlet and that the outlet is working. If there is a fuse, make sure that it is not blown. If the power connection is okay, then you should check the condenser coils.

The condenser coils are located at the back of the fridge and are responsible for dissipating heat from the inside. If these coils are clogged, the cooling will not work properly. To clean the coils, you can use a vacuum cleaner with a brush attachment to gently clean the coils.

Once the power connection and condenser coils are checked, the cooling should be working properly. You can then adjust the temperature to the desired setting. If you are still having trouble, it is best to contact a professional for help.

We hope that this article has helped you understand how to turn on the cooling on your Whirlpool refrigerator. For more information on maintaining your refrigerator, you can always consult your user manual or contact Whirlpool customer service.

How to reset whirlpool refrigerator from cooling OFF to cooling ON

VIDEO: How to Turn the Power On and Off – Built-in Refrigerator – Product Help | Whirlpool Home Refrigeration Full-Size Refrigerators Product Info Videos VIDEO: How to Turn the.

Leave a Comment