How To Use A Husky Drain Auger? Place a drop cloth or dishpan below the drain opening and wear gloves. Remove the trap and elbow, as well as the pipe that leads to the wall. Loosen the. Slowly insert the metal cable end of the drain auger into the drain. Maneuver the drain auger inside and turn the auger clockwise slowly as you push it in.. How To Use Husky Drain Auger? (Read This First!) To hold the cable in place, tighten the wing nut and start with a short length of cable. Continue until cable enters drain to desired.
A Husky drain auger is a useful tool to help clear clogged drains. It’s a flexible metal rod with a spring-tipped cable on the end that is made to be inserted into the drain and rotate around, scraping away the obstruction. If you’re wondering how to use a Husky drain auger, then you’re in the right place. Here’s a step-by-step guide to get you started.
Step 1: Prepare the drain auger. Before you use the Husky drain auger, make sure you have the necessary safety equipment. Put on safety glasses and gloves to protect yourself from any debris that might come out of the drain. Also, make sure the area is well-ventilated. Then, set up the Husky drain auger by assembling the pieces as directed in the instructions.
Step 2: Insert the drain auger. Insert the spring-tipped cable into the drain and rotate it around until it meets the obstruction. Keep rotating the cable to break up the obstruction and clear the drain. If the obstruction is too difficult to break up, you may need to use a stronger auger.
Step 3: Retrieve the debris. Once the obstruction has been broken up, slowly pull the cable back out of the drain. Be sure to retrieve any debris that may have come out of the drain. If the debris is too large to be retrieved easily, you may need to use a plunger or a larger auger.
Step 4: Rinse the drain. After you have retrieved the debris, it’s important to rinse the drain with hot water. This will help to make sure any remaining debris is flushed away. If the drain is still clogged, repeat steps 2 and 3 until the drain is clear.
Step 5: Disassemble and store the drain auger. When you’re done using the Husky drain auger, make sure to disassemble it and store it in a dry place. This will help to ensure that the cable and spring remain in good condition for future use.
Using a Husky drain auger is a great way to clear clogged drains. Just follow these easy steps and you’ll be on your way to a clog-free drain in no time!
Husky 1/4 in. x 15 ft. Drain Auger Demonstration
Had a badly clogged drain most likely caused by hard water mineral desposits. I've used a number of bottles of drain-o with no luck. So I bought this Husky drain auger from Home Depot and got it cleaned out pretty quick. Since I couldn't find any demo video's, I decided to make my own to help someone who has never used one of these before. Subscribe here: bit.ly/3evMQ8H …