How To Use Stud Finder Zircon? Place the stud finder flat against the wall, press and hold the power button, and wait for 1-2 seconds. The tool automatically calibrates to the wall’s surface. If there is a calibration. When you hold your StudSensor TM stud finder against a wall and turn it on, it emits a weak electric field that you can't see or feel. The circuitry inside your StudSensor TM.
A stud finder Zircon is a tool used to locate the edges of wall studs, joists, and other hidden objects in walls, floors, and ceilings. It is especially useful for finding studs when mounting shelves and other heavy items. The Zircon stud finder is equipped with advanced technology that helps you accurately locate the edges of wall studs and joists. Here is how to use a stud finder Zircon:
1. Before using the stud finder Zircon, make sure the wall or ceiling is free of any obstructions or clutter.
2. Place the stud finder Zircon on the wall or ceiling and press the “on” button.
3. Move the stud finder Zircon slowly across the wall or ceiling. If the device detects a stud or joist, it will beep or light up.
4. When the stud finder Zircon beeps or lights up, mark the spot with a pencil or marker.
5. Move the stud finder Zircon further across the wall or ceiling and repeat steps 3 and 4 until the entire wall or ceiling is scanned.
6. Once you have found all the studs or joists, you can start mounting shelves and other items.
When using a stud finder Zircon, it is important to remember that the device may not be able to detect the edges of the studs or joists in certain areas, such as near electrical wires or pipes. If you are unable to locate studs in an area, it is best to consult a professional before attempting to mount any items.
It is also important to note that the stud finder Zircon is only designed to locate the edges of studs and joists. It is not designed to detect electrical wiring or pipes. If you are unsure about the presence of any electrical wiring or pipes in the area, it is best to consult a professional.
By following these steps, you can easily use a stud finder Zircon to accurately locate the edges of wall studs, joists, and other hidden objects in walls, floors, and ceilings. With this tool, you can easily mount shelves and other heavy items with confidence.
How to Use a Zircon StudSensor e50 Stud Finder to Find Wall Studs
* A BRAND NEW 9V ALKALINE BATTERY IS REQUIRED FOR PROPER OPERATION. * zirconcustomerservice.wordpress.com/2014/02/10/how-is-your-battery/ 1-800-245-9265 Toll-free, Mon – Fri. 8am – 5pm PST (excluding holidays) The Zircon StudSensor e50 quickly and easily locates the edges of wood and metal studs and joists behind walls, floors, and ceilings up to 1 1/2 inches deep. Its easy-to-read display screen indicates stud edges, the patented SpotLite®…