How To Winterize A Whirlpool Refrigerator With Ice Maker? For ice makers, empty the storage bin, clean it, and make sure the drain valve is closed. For kegerators, remove CO2 tank and keg (s) Completely empty the. Here's how I winterize the icemaker: 1. Unplug the Icemaker from its 120vac outlet. Remove the ice maker solenoid. Take it in the house and keep it warm. It cannot.
Winterizing a whirlpool refrigerator with an ice maker can be a daunting task, especially for those who are unfamiliar with the process. Fortunately, it is possible to winterize a whirlpool refrigerator with an ice maker, as long as you follow the right steps. In this article, we will discuss how to winterize a whirlpool refrigerator with an ice maker in a few simple steps.
The first step in winterizing a whirlpool refrigerator with an ice maker is to shut off the power to the refrigerator. This can be done by unplugging the power cord from the wall outlet or by flipping the circuit breaker. It is important to make sure that the power is completely off before continuing with the winterizing process.
The next step is to empty the refrigerator of all food and beverages. Any items that cannot be stored in a cool, dry place should be discarded. Once the refrigerator is empty, the shelves and drawers should be removed and cleaned with a mild soap and water solution. Once the shelves and drawers are clean, they should be dried thoroughly before being returned to the refrigerator.
The third step is to disconnect the water line from the refrigerator. This can be done by turning off the water supply and then locating the water line that is connected to the refrigerator. The water line should be disconnected and a bucket should be placed beneath the water line to catch any remaining water.
The fourth step is to turn off the ice maker. This can be done by locating the ice maker’s power switch and turning it off. The ice maker should then be disconnected from the refrigerator and allowed to drain. Once the ice maker is drained, it should be dried thoroughly before being stored in a cool, dry place.
The fifth step is to clean the refrigerator. This can be done by using a mild soap and water solution and wiping down the interior of the refrigerator. It is important to make sure that all surfaces are thoroughly cleaned and dried before being returned to the refrigerator.
The sixth step is to inspect the refrigerator for any signs of wear or damage. If any damage is found, it should be repaired or replaced as soon as possible. Once the refrigerator is in good working condition, the power can be reconnected and the refrigerator can be used again.
Finally, the seventh step is to reassemble the refrigerator. All parts should be put back in their original places and the shelves and drawers should be returned to the refrigerator. Once all of the parts are in place, the refrigerator should be plugged back in and the ice maker should be reconnected to the refrigerator.
Following these steps will ensure that your whirlpool refrigerator with an ice maker is properly winterized and ready for use. It is important to remember that winterizing a whirlpool refrigerator with an ice maker can be a lengthy process, but is necessary to ensure the refrigerator’s longevity and performance. With a little bit of time and effort, your refrigerator will be properly winterized and ready for use.
Winterize Whirlpool Residential RV Fridge Ice Maker
Used a bypass for much quicker results.
The water in door turn the valve back on just push it like your getting water till pink comes out, the ice maker you can find the S valve on the back and apply 120V to it. Here are the steps, as recommended by Norcold: To winterize the water valve and water line: 1. Shut off RV water supply to the ice maker. 2. Raise and lock shutoff.