Making Your Own Homemade Jewelry Cleaner

By

Do you own pieces of silver, white and yellow gold, stainless steel, and other jewelry variants? If you have a collection of precious and semi-precious stones and would like to take good care of them, but you don’t really know what commercial jewelry cleaner to trust, stop shopping for one. You can make your own jewelry cleaner.

It’s so easy to make jewelry cleaner, and when you make the cleaner yourself, you can be sure that the solution is mild enough not to harm your treasures.

How To Make Jewelry Cleaner For Jewelry Without Stones

This homemade jewelry cleaner recipe works best for the following metals:

  • Gold-fill
  • Brass
  • Nickel
  • Sterling Silver

However, this is NEVER to be used for jewelry pieces that have stones. This is too harsh for the stones and could cause damage. You will need:

  • One tablespoon of salt
  • One tablespoon of baking soda
  • One tablespoon of dishwashing soap
  • A cup of water
  • A piece of aluminum foil
  • A soft cloth

To make this solution, heat the water in a microwave saucepan. Get a small bowl and cover the bottom of that bowl with a piece of aluminum foil. Put the hot water into the bowl. Add salt and baking soda into the hot water, and stir everything in with the dishwashing soap.

Once the solution is ready, submerge the jewelry pieces into your homemade jewelry cleaner. Leave them there for at least five minutes and ten minutes at the latest. After ten minutes, remove them from the solution and rinse them with cold water. Wipe off the excess moisture with your soft cloth, and your jewelry should look shiny and new again.

Never reuse the solution. You can discard it by draining it into the kitchen sink.

For Hard Stones Like Diamonds

If your jewelry pieces have stones, and they are classified as hard stones, you will just need vodka. Sink your diamond and hard stone pieces in a bowl of vodka. Let it sit for five to ten minutes, rinse it with cold water afterward, and polish them off with a soft cloth.

How To Make Jewelry Cleaner For Softer Stones

Capiz, pearls, opal, and coral should never be cleaned with chemicals because they’re so fragile that they could be damaged even with just a few minutes’ worth of exposure.

You need to purchase an untreated piece of chamois or leather cloth. This cloth type can be bought from the hardware store. Don’t wipe it with any scented oil, either, because the stones can and will absorb the oil. This can cause deformation.

How To Make Jewelry Cleaner For Tarnished Jewelry

If you have gold, silver, or white gold pieces, you may just be facing tarnishing. To treat tarnished metals, simply use toothpaste but avoid the fancy ones with anti-plaque gels or the ones with tartar control.

Look for the original toothpaste variants from Colgate and other brands. These don’t have silica crystals that could scratch your jewelry. Use an old toothbrush, apply toothpaste to it, and gently use this brush to scrub your tarnished jewelry. Make sure you scrub the inner side of your tarnished rings.

You may want to use your fingers for necklaces and other frailer pieces. Don’t brush too hard because you want to clean your jewelry, not ruin them.

Send this to a friend