Tricklestar Power Strip How To Use Switched? How to correctly use a TrickleStar Havoc Sun 1K subscribers Subscribe 335 47K views 4 years ago TrickleStar can save you over a hundred dollars a year if used. The Tricklestar power strip is a type of surge protector. It helps to reduce standby power waste to save money. Knowing its functions will help us understand how it.
Tricklestar power strips are a convenient way to provide power to multiple devices. They are designed to prevent overloading and provide surge protection for electronics. However, if you are unsure how to use a Tricklestar power strip with a switched outlet, it can be confusing. This article will provide a step-by-step guide to help you understand how to properly use a Tricklestar power strip with a switched outlet.
First, you need to determine which type of Tricklestar power strip you have. The most common type is the Master/Slave type, where the Master outlet is the switched outlet and the Slave outlets are the non-switched outlets. Make sure you know which outlet is which before you start plugging in devices.
Next, you will need to plug the power strip into a wall outlet. Make sure the outlet is rated for the wattage of the power strip. If the wattage is too high, it can cause an overload and potentially damage the power strip.
Once the power strip is plugged in, you can start plugging in devices. The Master outlet is the switched outlet, so it should be used for devices that you want to be able to turn on and off using the power switch. The Slave outlets should be used for devices that you want to stay on all the time.
When you are finished plugging in your devices, you can use the power switch to turn the power strip on or off. When the power switch is in the “on” position, all outlets will have power. When the power switch is in the “off” position, only the Master outlet will have power. This means that the devices plugged into the Master outlet can be turned on and off, while the devices plugged into the Slave outlets will remain on.
It is important to note that the Tricklestar power strip should only be used with devices that are rated for the wattage of the power strip. If the wattage is too high, it can cause an overload and damage the power strip. It is also important to make sure the power switch is in the correct position before plugging in any devices.
To summarize, using a Tricklestar power strip with a switched outlet is not difficult. First, determine which type of power strip you have and make sure the wattage is rated for the outlet. Plug the power strip into a wall outlet and start plugging in your devices, using the Master outlet for devices that you want to be able to turn on and off and the Slave outlets for devices that you want to stay on all the time. Finally, make sure the power switch is in the correct position before plugging in any devices.
How to correctly use a TrickleStar
TrickleStar can save you over a hundred dollars a year if used correctly and everywhere you have a Phantom energy drain. WOW, when I put this all back together going to do a little dusting.